K3 1000mW Mini Laser Engraver Printer DIY Logo Marking USB Engraving Machine 8x8cm
- List PriceUS$99.90piece
- Sale PriceUS$99.90piece
- ShippingFree Shipping
Model: K3 1000mW
Material: ABS (Acrylonitrile Butadiene Styrene plastic)
Power Adapter Cable Length: 110cm
USB Cable Length: 11cm
Plug Type: US Plug
Laser Power: 1000mW
Carving Area: 80x80mm (3.1"x3.1")
Carving Dpth: 1mm
Applicable Range: Plane Surface
Supporting System: Windows XP/7/8/10
Supporting Image Format: JPEG/ JPG/ PNG/ BMP
Engraving Materials: Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
Can Not Engrave: Metal, Stone, Ceramics, Glass, Reflective or Transparent Material
1. Connect the laser egraver to computer with USB cable, plug into power;
2. Insert U Disk, copy all the files to your computer;
3. Then click the "driver.exe" to install driver;
4. Uncompress the "Scarve.zip", and open the floder, click the "scarve-en.exe".
5. Choose and import a picture (simply drag a picture into the blank), adjust the pic as you want , then start engraving. (More details in the paper user manual)
* Please connect the engraver to computer before install the software, or the engraver is unable to function correctly.
1. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.
2. Do not use the laser head to point at human or livestock,do not use laser to point at people’s eyes.
3. Laser has power.skin exposure to laser is strictly prohibited.
4. The caving machine should not be stopped while working, it will cause a damage.
5. This product not suitable for kids under age of 14.
6. Software only support Windows.
7. Do not fall or make any collision to the product.
8. The shell with laser cutting technology,sharp edge,please pick up and down gently to prevent scratches.
9. Metal, glass, crystal and transparent or translucent stuff are can not be engraved.
10. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
11. You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software.
12. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time.
1 x Laser engraver
1 x USB Disk
1 x Screw Driver
4 x Screws
4 x Screw Caps
1 x Power Adapter
1 x USB Cable
2 x Wooden Boards
1 x English User ManualMore Details: